Unitech’s RM300 series is a high-performance UHF RFID reader module based on Impinj R2000 chip and compliant with EPC C1 Gen2 / ISO 18000-6C and FCC modular approval requirements. System Integrators, RFID device makers could use RM300 to develop their own products with the benefits of cost-efficiency and high-performance.
Features
• Support for EPC C1 Gen2 / ISO 18000-6C tag protocol with anti-collision, DRM and Listen-Before-Talk features
• International operation with global frequency coverage over 860-960 MHz band
• Offer two kinds of models with two or four (MMCX) antenna connectors for choice
• Adjustable transmit output level control from 5 dBm to 30 dBm in 1 dB step
• Maximum tag read rate of over 900 tags per second
• Maximum tag read distance of over 27 feet (9 m) with 6 dBi antenna
• Easy to use Starter Kit to shorten product development time
Unitech’s RM300 series is a high-performance UHF RFID reader module based on Impinj R2000 chip and compliant with EPC C1 Gen2 / ISO 18000-6C and FCC modular approval requirements. System Integrators, RFID device makers could use RM300 to develop their own products with the benefits of cost-efficiency and high-performance.
RM300 series has two models, one is named RM300-2port with two (MMCX) antenna connectors and the other one is RM300-4port with four (MMCX) antenna connectors. The antenna connectors of RM300-2port that can be configured as one bi-static antenna or two mono-static antennas. It also supports dense reader mode (DRM), anti-collision, and Listen-Before-Talk (LBT) features. RM300 has an operating distance up to 9 meters when its adjustable TX power is set to 30 dBm with a 6 dBi antenna. In addition, RM300 is small and ideal for adding UHF RFID read/write capabilities to a wide range of products and solutions such as handheld PDA, label printers, stationary readers, or any other device for UHF RFID applications. RM300 uses Serial and USB interfaces to connect to an external processor board or PC host.
Unitech offers a starter kit to enable you to design RM300 into your products quickly and easily. This kit includes SDK, demo code, driver, and documentation. With its tiny size, excellent operating range, and high quality UHF RFID technology, RM300 is the perfect solution for embedded RFID applications.
RFID Label & Tags Solutions for User’s Options
For a successful and complete RFID solution, the selection of RFID labels and tags is essential.
According to the target material and application that the customer wants to control, choosing the right labels or tags will greatly improve the operation process and efficiency of the entire RFID solution.
Learn more aboutRFID Label & Tags.
Specification
Operation System
- CPU ATMEL AT91SAM7S - 256
RFID
-
UHF
FCC (US) 902- 928 MHz,
SRRC (China) 920.5 – 924.5 MHz,
TELEC (Japan) 916.8 - 923.4 MHz,
NCC (Taiwan) 922 - 928 MHz
CE (Europe) 865 – 868 MHz
UHF RFID Performance
- Chip IMPINJ R2000
- Reading Distance 9m with a 6 dBi antenna ( 36 dBm EIRP )
- Tag Read Rate Over 900 tags/second
-
Antenna Ports
Two/Four MMCX antenna connectors supporting 2/4mono-static antennas,
or one bi-static antenna, with VSWR less than 2:1 - RF Power output Adjustable from 5 dBm to 30 dBm @ ±1 dBm
I/O Interfaces
- USB USB 2.0 Full Speed (12 Mbps )
- Serial Interface UART : Baud rates: 9,600 to 115,200 bps, Logic levels: 3.3 / 5 V
- Digital IO Interface 5 GPIO pins, Logic levels: 3.3 / 5 V
-
Connector
■ RM300-2port 50-pin ( HRS-DF12 SMT connector )
PIN / NAME
1. UART_CTS
2. UART_RTS
3. UART_TX
4. UART_RX
5. GND
6. /BD_RESET
7. /BD_PWR_EN
8. GPIO_6
9. GPIO_5
10. GPIO_4
11. GPIO_3
12. GPIO_2
13. GPIO_1
14. GPIO_0
15. GND
16. VCC_5V
17. VCC_5V
18. VCC_5V
19. VCC_5V
20. VCC_5V
21. VCC_5V
22. VCC_5V
23. VCC_5V
24. NC
25. VBUS
26. GND
27. DM
28. DP
29. GND
30. GND
31. GND
32. GND
33. GND
34. GND
35. GND
36. GND
37. GND
38. GND
39. GND
40. GND
41. GND
42. GND
43. GND
44. GND
45. GND
46. GND
47. GND
48. GND
49. GND
50. GND
■ RM300-4port 20-pin ( ZIF FPC 0.5mm connector )
PIN / NAME
1. VCC_5V
2. VCC_5V
3. VCC_5V
4. VCC_5V
5. VCC_5V
6. GND
7. DGB_RX
8. GND
9. GB_TX
10. GND
11. UART_RX
12. GND
13. UART_TX
14. GND
15. GND
16. DM
17. DP
18. GPIO_0
19. GPIO_1
20. GPIO_2
Enclosure
-
Dimension
76.5mm ( L ) x 50mm ( W ) x 4.2 mm ( H ) (2-port)
92.5mm ( L ) X 63mm ( W ) x 4.5 mm ( H ) (4-port)
Environmental
- Operating temperature -20°C to 60°C
- Storage temperature -30°C to 85°C
- Relative Humidity 10% ~ 85% Non-condensing
- Electrostatic Discharge 10 KV to antenna conductor with the antenna attached
Power Source
- Power 5V VDC
Regulatory Approvals
-
Types
RM300-2port (FCC, TELEC, NCC)
RM300 4-port (FCC, TELEC, NCC, CE)
What comes in the box
-
The standard package contents
■ RM300 UHF RFID Reader Module
■ Power Adaptor
■ Interface board
■ USB Cable
■ Antenna
■ RFID Tag
■ RS232 Cable
Accessories
-
Items
■ USB Cable
■ RS232 Cable
■ Power Adapter
■ RFID Tag
■ CD
■ Test Board
■ Antenna
Warranty
- Hardware Warranty 15 months
- Statement This product is warranted against defects in workmanship and materials for a period of fifteen months from the date of shipment. Accessories are warranted for three months to one year. Our different regions have varying warranty terms, and offer extended and comprehensive warranties, so please contact your local representative for more information.
Accessories
Download
Marketing Material
-
1.2MB47 Downloads
-
Rev.G1.2MB223 Downloads
Technical Material
-
For RM300 2-Port and RM300 4-Port Version1MB68 Downloads
-
5.8MB213 Downloads
-
3.1MB123 Downloads
-
For RM300 2-Port and RM300 4-Port Versions244.4KB62 Downloads
-
For RM300 4-Port Version794.3KB44 Downloads
-
2.4MB112 Downloads
-
For RM300 4-Port Version253.4KB24 Downloads
FAQ
-
52.2KB58 Downloads
Product updates and tips!
-
Check here for manuals and additional product information!11 Downloads